When working on a nitrous kit it will be very important to watch for the filter that is used for the kit. A nitrous filter should be used to help with getting the nitrous kit to be protected from any harmful materials that can impact the effectiveness of the nitrous kit. Installing one of these filters is very easy to do.
In order to install a nitrous filter it will be important to look into the size of the solenoid on the nitrous kit. A nitrous filter will work to fit different types of assemblies. The NPT, or national pipe thread size, of the filter will be important to consider because of how some filters will have an NPT of a quarter of an inch or one eighth of an inch. The filter will need to be of the right size for the installation process to work properly.
The filter fitting will need to be inserted into the solenoid on its inlet port. This will be the same for both the nitrous and fuel solenoids.
When getting the fitting inserted into the solenoid the solenoid itself should be in a bench vise. This is so that it will be easier to get the solenoid to be worked on. The vise should not be tightened too greatly because if it is too tight the solenoid can become damaged and the filter will not be able to work as well.
If a pipe thread is used for the nitrous filter then Teflon paste can be used. This material is a durable material that will work to help with sealing the connection between the filter and other parts of the nitrous kit. It is best to use this instead of Teflon tape because the tape can come apart with ease.
ไม่มีความคิดเห็น:
แสดงความคิดเห็น